 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Chip LED Device LT1t53A series LT1t53A series s Outline Dimensions (Unit : mm) 3.3!2.9mm, 1.1mm Thickness, Milky Diffusion Chip LED Devices s Radiation Diagram (Ta=25C) 3.3 Milky diffusion -30 -40 -20 -10 0 100 +10 100 +20 +30 +40 -50 Relative luminous intensity(%) 80 +50 60 2.9 1.9 0.4 0.4 0.4 0.85 0.95 1 2 0.6 2.9 -60 +60 40 +70 20 +80 (4-R0.2) 0.9 +0.1 0.16-0.06 -70 1.5 0.9 (R0.2) -80 -90 +0.2 1.1-0.1 +90 0 (0.3) (0.3) (0.3) (0.3) Pin connections 1 Anode 2 Cathode Unspecified tolerance:0.2 s Absolute Maximum Ratings Model No. Radiation color Radiation material LT1P53A LT1D53A LT1S53A LT1H53A LT1E53A LT1K53A Red Red Sunset orange Yellow Yellow-green Green GaP GaAsP on GaP GaAsP on GaP GaAsP on GaP GaP GaP Power dissipation Forward current Peak forward current P IF IFM*1 (mW) (mA) (mA) 23 85 85 50 50 50 10 30 30 20 20 20 50 50 50 50 50 50 0to0.15 0.3 0.8 (Ta=25C) Derating factor Reverse voltage Operating temperature Storage temperature Soldering temperature (mA/C) VR Topr Tstg Tsol*2 (V) (C) (C) (C) DC Pulse 0.13 0.40 0.40 0.27 0.27 0.27 0.67 0.67 0.67 0.67 0.67 0.67 5 5 5 5 5 5 -25 to +85 -25 to +85 -25 to +85 -25 to +85 -25 to +85 -25 to +85 -25 to +100 -25 to +100 -25 to +100 -25 to +100 -25 to +100 -25 to +100 350 350 350 350 350 350 *1 Duty ratio=1/10, Pulse width=0.1ms *2 For 3s or less at the temperature of hand soldering. Temperature of reflow soldering is shown on the below page. s Electro-optical Characteristics Forward voltage VF(V) TYP 1.9 2.0 2.0 1.9 1.85 1.95 MAX 2.3 2.8 2.8 2.5 2.5 2.5 Peak emission wavelength IF p(nm) (mA) TYP 5 695 20 635 20 610 10 585 10 565 10 555 Luminous intensity IF IV(mcd) (mA) TYP 5 1.4 20 9.6 20 7.8 10 3.7 10 4.8 10 2.2 Spectrum radiation bandwidth IF (nm) (mA) TYP 5 100 20 35 20 35 10 30 10 30 10 25 Reverse current VR IR(A) (V) MAX 4 10 4 10 4 10 4 10 4 10 4 10 Terminal capacitance Ct(pF) TYP 55 20 15 35 35 40 (Ta=25C) Page for characteristics (MHZ) diagrams 1 1 1 1 1 1 Lens type Model No. LT1P53A LT1D53A Milky LT1S53A diffusion LT1H53A LT1E53A LT1K53A In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. (Internet) Data for sharp's optoelectronic/power device is provided for internet.(Address http://www.sharp.co.jp/ecg/) (Notice) 99 LED Lamp PR series Characteristics Diagrams Forward Current Derating Curve 60 Forward Current vs. Forward Voltage(Note) 100 50 (Ta=25C) Luminous Intensity vs. Ambient Temperature(Note) 1000 500 (Ta=25C) 50 Relative luminous intensity(%) Forward current IF(mA) Forward current IF(mA) 40 10 5.0 100 50 30 20 1.0 0.5 10 5.0 10 0 -25 0 25 50 75 85 100 125 0.1 1.0 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 -20 0 20 40 60 80 100 120 Forward voltage VF(V) Ambient temperature Ta(C) Ambient temperature Ta(C) Peak Forward Current Derating Curve 60 Luminous Intensity vs. Forward Current(Note) 1000 500 (Ta=25C) Duty Ratio vs. Peak Forward Current (Ta=25C) 500 200 Peak forward current IFM(mA) 100 50 50 Relative luminous intensity(%) 200 100 50 Peak forward current IFM(mA) 40 30 20 10 5.0 2.0 20 10 5.0 2.0 1.0 20 10 0 -25 0 25 50 75 85 100 125 1.0 0.1 0.2 0.5 1 2 5 10 20 50 1/50 1/20 1/10 1/5 1/2 1 Ambient temperature Ta(C) Forward current IF(mA) Duty ratio DR HD series Forward Current Derating Curve 60 Forward Current vs. Forward Voltage(Note) 100 50 (Ta=25C) Luminous Intensity vs. Ambient Temperature(Note) 1000 500 (Ta=25C) 50 Relative luminous intensity(%) 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 Forward current IF(mA) Forward current IF(mA) 40 10 5.0 100 50 30 20 1.0 0.5 10 5.0 10 0 -25 0 25 50 75 85 100 125 0.1 1.0 1.0 -20 0 20 40 60 80 100 120 Forward voltage VF(V) Ambient temperature Ta(C) Ambient temperature Ta(C) Peak Forward Current Derating Curve 60 Luminous Intensity vs. Forward Current(Note) 1000 500 (Ta=25C) Duty Ratio vs. Peak Forward Current (Ta=25C) 500 200 Peak forward current IFM(mA) 100 50 50 Relative luminous intensity(%) 200 100 50 Peak forward current IFM(mA) 40 30 20 10 5.0 2.0 20 10 5.0 2.0 1.0 20 10 0 -25 0 25 50 75 85 100 125 1.0 0.1 0.2 0.5 1 2 5 10 20 50 1/50 1/20 1/10 1/5 1/2 1 Ambient temperature Ta(C) Forward current IF(mA) Duty ratio DR Note)Characteristics shown in diagrams are typical values. (not assurance value) devices catalogs, data books, etc. Contact SHARP 8 (Internet) Data forshown inoptoelectronic/power device is provided for in order to obtain the latest device specification sheets before using any SHARP device. sharp's internet.(Address http://www.sharp.co.jp/ecg/) (Notice) In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP LED Lamp HS series Characteristics Diagrams Forward Current Derating Curve 60 Forward Current vs. Forward Voltage(Note) 100 50 (Ta=25C) Luminous Intensity vs. Ambient Temperature(Note) 1000 500 Relative luminous intensity(%) (IF=20mA) 50 Forward current IF(mA) 40 Forward current IF(mA) 20 10 5 3 2 200 30 100 50 20 10 1 0 -25 0.5 1.0 20 10 1.2 1.4 1.6 1.8 2.0 2.2 2.4 -20 0 20 40 60 80 100 Forward voltage VF(V) Ambient temperature Ta(C) 0 25 50 75 85 100 125 Ambient temperature Ta(C) Peak Forward Current Derating Curve 60 Luminous Intensity vs. Forward Current(Note) 500 (Ta=25C) Duty Ratio vs. Peak Forward Current 500 300 (Ta=25C) 50 Relative luminous intensity(%) Peak forward current IFM(mA) 200 Peak forward current IF(mA) 100 50 40 100 50 30 30 20 10 5 20 10 2 0 -25 0 25 50 75 85 100 125 1 0.1 0.2 0.5 1 2 5 10 20 50 10 5 1/50 1/20 1/10 1/5 1/2 1 Forward current IF(mA) Duty ratio DR Ambient temperature Ta(C) HY series Forward Current Derating Curve 60 Forward Current vs. Forward Voltage(Note) 100 50 (Ta=25C) Luminous Intensity vs. Ambient Temperature(Note) 1000 500 (Ta=25C) 50 Relative luminous intensity(%) 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 Forward current IF(mA) 40 Forward current IF(mA) 10 5.0 100 50 30 20 1.0 0.5 10 5.0 10 0 -25 0 25 50 75 85 100 125 0.1 1.0 1.0 -20 0 20 40 60 80 100 120 Forward voltage VF(V) Ambient temperature Ta(C) Ambient temperature Ta(C) Peak Forward Current Derating Curve 60 Luminous Intensity vs. Forward Current(Note) 1000 500 (Ta=25C) Duty Ratio vs. Peak Forward Current (Ta=25C) 500 200 Peak forward current IFM(mA) 100 50 50 Relative luminous intensity(%) 200 100 50 Peak forward current IFM(mA) 40 30 20 10 5.0 2.0 20 10 5.0 2.0 1.0 20 10 0 -25 0 25 50 75 85 100 125 1.0 0.1 0.2 0.5 1 2 5 10 20 50 1/50 1/20 1/10 1/5 1/2 1 Ambient temperature Ta(C) Forward current IF(mA) Duty ratio DR Note)Characteristics shown in diagrams are typical values. (not assurance value) In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. (Internet) Data for sharp's optoelectronic/power device is provided for internet.(Address http://www.sharp.co.jp/ecg/) (Notice) 11 LED Lamp EG series Characteristics Diagrams Forward Current Derating Curve 60 Forward Current vs. Forward Voltage(Note) 100 50 (Ta=25C) Luminous Intensity vs. Ambient Temperature(Note) 1000 500 (Ta=25C) 50 Relative luminous intensity(%) 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 Forward current IF(mA) Forward current IF(mA) 40 10 5.0 100 50 30 20 1.0 0.5 10 5.0 10 0 -25 0 25 50 75 85 100 125 0.1 1.0 1.0 -20 0 20 40 60 80 100 120 Forward voltage VF(V) Ambient temperature Ta(C) Ambient temperature Ta(C) Peak Forward Current Derating Curve 60 Luminous Intensity vs. Forward Current(Note) 1000 500 (Ta=25C) Duty Ratio vs. Peak Forward Current (Ta=25C) 500 200 Peak forward current IFM(mA) 100 50 50 Relative luminous intensity(%) 200 100 50 Peak forward current IFM(mA) 40 30 20 10 5.0 2.0 20 10 5.0 2.0 1.0 20 10 0 -25 0 25 50 75 85 100 125 1.0 0.1 0.2 0.5 1 2 5 10 20 50 1/50 1/20 1/10 1/5 1/2 1 Ambient temperature Ta(C) Forward current IF(mA) Duty ratio DR KG series Forward Current Derating Curve 60 Forward Current vs. Forward Voltage(Note) 100 50 (Ta=25C) Luminous Intensity vs. Ambient Temperature(Note) 1000 500 (Ta=25C) 50 Relative luminous intensity(%) 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 Forward current IF(mA) Forward current IF(mA) 40 10 5.0 100 50 30 20 1.0 0.5 10 5.0 10 0 -25 0 25 50 75 85 100 125 0.1 1.0 1.0 -20 0 20 40 60 80 100 120 Forward voltage VF(V) Ambient temperature Ta(C) Ambient temperature Ta(C) Peak Forward Current Derating Curve 60 Luminous Intensity vs. Forward Current(Note) 1000 500 (Ta=25C) Duty Ratio vs. Peak Forward Current (Ta=25C) 500 200 Peak forward current IFM(mA) 100 50 50 Relative luminous intensity(%) Peak forward current IFM(mA) 200 100 50 40 30 20 10 5.0 2.0 20 10 5.0 2.0 1.0 20 10 0 -25 0 25 50 75 85 100 125 1.0 0.1 0.2 0.5 1 2 5 10 20 50 1/50 1/20 1/10 1/5 1/2 1 Ambient temperature Ta(C) Forward current IF(mA) Duty ratio DR Note)Characteristics shown in diagrams are typical values. (not assurance value) devices catalogs, data books, etc. Contact SHARP 0 (Internet) Data forshown inoptoelectronic/power device is provided for in order to obtain the latest device specification sheets before using any SHARP device. sharp's internet.(Address http://www.sharp.co.jp/ecg/) (Notice) In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP |
Price & Availability of LT1P53A
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |